Representative Brad R. Wilson proposes the following substitute bill:


1     
BUILDING CODE REVIEW AND ADOPTION AMENDMENTS

2     
2015 GENERAL SESSION

3     
STATE OF UTAH

4     
Chief Sponsor: Brad R. Wilson

5     
Senate Sponsor: J. Stuart Adams

6     

7     LONG TITLE
8     General Description:
9          This bill modifies and repeals provisions of the State Construction and Fire Codes Act.
10     Highlighted Provisions:
11          This bill:
12          ▸     modifies the process by which the Legislature adopts new versions of the State
13     Construction Code and the State Fire Code;
14          ▸     addresses the ability of state and local entities to adopt a rule or ordinance that is
15     different from the State Construction Code or the State Fire Code;
16          ▸     adopts the 2014 National Electrical Code;
17          ▸     adds an amendment to the 2014 National Electrical Code that relates to certain
18     circuit breakers;
19          ▸     updates a reference to the International Fire Code;
20          ▸     repeals provisions relating to amendments to the International Building Code and
21     the International Residential Code that apply to the City of Farmington; and
22          ▸     makes technical and conforming changes.
23     Money Appropriated in this Bill:
24          None
25     Other Special Clauses:
26          This bill provides a special effective date.
27     Utah Code Sections Affected:
28     AMENDS:
29          15A-1-204, as last amended by Laws of Utah 2014, Chapters 178 and 189
30          15A-1-403, as enacted by Laws of Utah 2011, Chapter 14
31          15A-2-103, as last amended by Laws of Utah 2013, Chapters 279 and 297
32          15A-3-113, as last amended by Laws of Utah 2013, Chapter 297
33          15A-3-303, as last amended by Laws of Utah 2013, Chapter 297
34          15A-3-601, as last amended by Laws of Utah 2013, Chapter 297
35          15A-4-107, as enacted by Laws of Utah 2011, Chapter 14
36     REPEALS:
37          15A-4-103, as enacted by Laws of Utah 2011, Chapter 14
38          15A-4-203, as enacted by Laws of Utah 2011, Chapter 14
39     

40     Be it enacted by the Legislature of the state of Utah:
41          Section 1. Section 15A-1-204 is amended to read:
42          15A-1-204. Adoption of State Construction Code -- Amendments by commission--
43     Approved codes -- Exemptions.
44          (1) (a) The State Construction Code is the construction codes adopted with any
45     modifications in accordance with this section that the state and each political subdivision of the
46     state shall follow.
47          (b) A person shall comply with the applicable provisions of the State Construction
48     Code when:
49          (i) new construction is involved; and
50          (ii) the owner of an existing building, or the owner's agent, is voluntarily engaged in:
51          (A) the repair, renovation, remodeling, alteration, enlargement, rehabilitation,
52     conservation, or reconstruction of the building; or
53          (B) changing the character or use of the building in a manner that increases the
54     occupancy loads, other demands, or safety risks of the building.
55          (c) On and after July 1, 2010, the State Construction Code is the State Construction
56     Code in effect on July 1, 2010, until in accordance with this section:
57          (i) a new State Construction Code is adopted; or
58          (ii) one or more provisions of the State Construction Code are amended or repealed in
59     accordance with this section.
60          (d) A provision of the State Construction Code may be applicable:
61          (i) to the entire state; or
62          (ii) within a county, city, or town.
63          (2) (a) The Legislature shall adopt a State Construction Code by enacting legislation
64     that adopts a nationally recognized construction code with any modifications.
65          (b) Legislation [enacted under this Subsection (2)] described in Subsection (2)(a) shall
66     state that [it] the legislation takes effect on the July 1 after the day on which the legislation is
67     enacted, unless otherwise stated in the legislation.
68          (c) Subject to Subsection [(5)] (6), a State Construction Code adopted by the
69     Legislature is the State Construction Code until, in accordance with this section, the Legislature
70     adopts a new State Construction Code by:
71          (i) adopting a new State Construction Code in its entirety; or
72          (ii) amending or repealing one or more provisions of the State Construction Code.
73          (3) (a) Except as provided in Subsection (3)(b), for each update of a nationally
74     recognized construction code, the commission shall prepare a report described in Subsection
75     (4).
76          (b) For the provisions of a nationally recognized construction code that apply only to
77     detached one- and two-family dwellings and townhouses not more than three stories above
78     grade plane in height with separate means of egress and their accessory structures, the
79     commission shall prepare a report described in Subsection (4) in 2015 and, thereafter, for every
80     second update of the nationally recognized construction code.
81          (4) (a) By September 1 of the year in which an update described in Subsection (3) is
82     published, the commission shall prepare and submit a report to the Business and Labor Interim
83     Committee that:
84          (i) states whether the commission recommends the Legislature adopt the update with
85     any modifications; and
86          (ii) describes the costs and benefits of each recommended change in the update or in
87     any modification.
88          (b) After the Business and Labor Interim Committee receives the report described in
89     Subsection (4)(a), the Business and Labor Interim Committee shall:
90          (i) study the recommendations during the remainder of the interim; and
91          (ii) if the Business and Labor Interim Committee decides to recommend legislative
92     action to the Legislature, prepare legislation for consideration by the Legislature in the next
93     general session.
94          [(3)] (5) (a) (i) The commission shall by no later than November 30 of each year in
95     which the commission is not required to submit a report described in Subsection (4),
96     recommend in a report to the Business and Labor Interim Committee whether the Legislature
97     should[: (i)] amend or repeal one or more provisions of [a] the State Construction Code[; or].
98          [(ii) in a year of a regularly scheduled update of a nationally recognized code, adopt a
99     construction code with any modifications.]
100          (ii) As part of a recommendation described in Subsection (5)(a)(i), the commission
101     shall describe the costs and benefits of each proposed amendment or repeal.
102          (b) The commission may recommend legislative action related to the State
103     Construction Code:
104          (i) on its own initiative;
105          (ii) upon the recommendation of the division; or
106          (iii) upon the receipt of a request by one of the following that the commission
107     recommend legislative action related to the State Construction Code:
108          (A) a local regulator;
109          (B) a state regulator;
110          (C) a state agency involved with the construction and design of a building;
111          (D) the Construction Services Commission;
112          (E) the Electrician Licensing Board;
113          (F) the Plumbers Licensing Board; or
114          (G) a recognized construction-related association.
115          [(4)] (c) If the Business and Labor Interim Committee decides to recommend
116     legislative action to the Legislature, the Business and Labor Interim Committee shall prepare
117     legislation for consideration by the Legislature in the next general session [that, if passed by the
118     Legislature, would:].
119          [(a) adopt a new State Construction Code in its entirety; or]
120          [(b) amend or repeal one or more provisions of the State Construction Code.]
121          [(5)] (6) (a) Notwithstanding [Subsection (3)] the provisions of this section, the
122     commission may, in accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking
123     Act, amend the State Construction Code if the commission determines that waiting for
124     legislative action in the next general legislative session would:
125          (i) cause an imminent peril to the public health, safety, or welfare; or
126          (ii) place a person in violation of federal or other state law.
127          (b) If the commission amends the State Construction Code in accordance with this
128     Subsection [(5)] (6), the commission shall file with the division:
129          (i) the text of the amendment to the State Construction Code; and
130          (ii) an analysis that includes the specific reasons and justifications for the commission's
131     findings.
132          (c) If the State Construction Code is amended under this Subsection [(5)] (6), the
133     division shall:
134          (i) publish the amendment to the State Construction Code in accordance with Section
135     15A-1-205; and
136          (ii) notify the Business and Labor Interim Committee of the amendment to the State
137     Construction Code, including a copy of the commission's analysis described in Subsection [(5)]
138     (6)(b).
139          (d) If not formally adopted by the Legislature at [its] the next annual general session,
140     an amendment to the State Construction Code under this Subsection [(5)] (6) is repealed on the
141     July 1 immediately following the next annual general session that follows the adoption of the
142     amendment.
143          [(6)] (7) (a) The division, in consultation with the commission, may approve, without
144     adopting, one or more approved codes, including a specific edition of a construction code, for
145     use by a compliance agency.
146          (b) If the code adopted by a compliance agency is an approved code described in
147     Subsection [(6)] (7)(a), the compliance agency may:
148          (i) adopt an ordinance requiring removal, demolition, or repair of a building;
149          (ii) adopt, by ordinance or rule, a dangerous building code; or
150          (iii) adopt, by ordinance or rule, a building rehabilitation code.
151          (8) Except as provided in Subsections (6) and (7), a compliance agency may not adopt
152     a rule or ordinance that has the effect of changing the requirements of the State Construction
153     Code.
154          [(7)] (9) (a) Except as provided in Subsection [(7)] (9)(b), a structure used solely in
155     conjunction with agriculture use, and not for human occupancy, is exempt from the permit
156     requirements of the State Construction Code.
157          (b) (i) Unless exempted by a provision other than Subsection [(7)] (9)(a), a plumbing,
158     electrical, and mechanical permit may be required when that work is included in a structure
159     described in Subsection [(7)] (9)(a).
160          (ii) Unless located in whole or in part in an agricultural protection area created under
161     Title 17, Chapter 41, Agriculture and Industrial Protection Areas, a structure described in
162     Subsection [(7)] (9)(a) is not exempt from a permit requirement if the structure is located on
163     land that is:
164          (A) within the boundaries of a city or town, and less than five contiguous acres; or
165          (B) within a subdivision for which the county has approved a subdivision plat under
166     Title 17, Chapter 27a, Part 6, Subdivisions, and less than two contiguous acres.
167          [(8)] (10) A structure that is no more than 1,000 square feet and is used solely for the
168     type of sales described in Subsection 59-12-104(20) is exempt from the permit requirements
169     described in:
170          (a) Chapter 2, Adoption of State Construction Code;
171          (b) Chapter 3, Statewide Amendments Incorporated as Part of State Construction
172     Code; and
173          (c) Chapter 4, Local Amendments Incorporated as Part of State Construction Code.
174          Section 2. Section 15A-1-403 is amended to read:
175          15A-1-403. Adoption of State Fire Code.
176          (1) (a) The State Fire Code is:
177          (i) a code promulgated by a nationally recognized code authority that is adopted by the
178     Legislature under this section with any modifications; and
179          (ii) a code to which cities, counties, fire protection districts, and the state shall adhere
180     in safeguarding life and property from the hazards of fire and explosion.
181          (b) On and after July 1, 2010, the State Fire Code is the State Fire Code in effect on
182     July 1, 2010, until in accordance with this section:
183          (i) a new State Fire Code is adopted; or
184          (ii) one or more provisions of the State Fire Code are amended or repealed in
185     accordance with this section.
186          (c) A provision of the State Fire Code may be applicable:
187          (i) to the entire state; or
188          (ii) within a city, county, or fire protection district.
189          (2) (a) The Legislature shall adopt a State Fire Code by enacting legislation that adopts
190     a nationally recognized fire code with any modifications.
191          (b) Legislation [enacted under this] described in Subsection (2)(a) shall state that [it]
192     the legislation takes effect on the July 1 after the day on which the legislation is enacted, unless
193     otherwise stated in the legislation.
194          (c) Subject to Subsection [(5)] (6), a State Fire Code adopted by the Legislature is the
195     State Fire Code until in accordance with this section the Legislature adopts a new State Fire
196     Code by:
197          (i) adopting a new State Fire Code in its entirety; or
198          (ii) amending or repealing one or more provisions of the State Fire Code.
199          (3) (a) Except as provided in Subsection (3)(b), for each update of a nationally
200     recognized fire code, the board shall prepare a report described in Subsection (4).
201          (b) For the provisions of a nationally recognized fire code that apply only to detached
202     one- and two-family dwellings and townhouses not more than three stories above grade plane
203     in height with separate means of egress and their accessory structures, the board shall prepare a
204     report described in Subsection (4) in 2015 and, thereafter, for every second update of the
205     nationally recognized fire code.
206          (4) (a) By September 1 of the year in which an update described in Subsection (3) is
207     published, the board shall prepare and submit a report to the Business and Labor Interim
208     Committee that:
209          (i) states whether the board recommends the Legislature adopt the update with any
210     modifications; and
211          (ii) describes the costs and benefits of each recommended change in the update or in
212     any modification.
213          (b) After the Business and Labor Interim Committee receives the report described in
214     Subsection (4)(a), the Business and Labor Interim Committee shall:
215          (i) study the recommendations during the remainder of the interim; and
216          (ii) if the Business and Labor Interim Committee decides to recommend legislative
217     action to the Legislature, prepare legislation for consideration by the Legislature in the next
218     general session.
219          [(3)] (5) (a) (i) The board shall, by no later than November 30 of each year in which the
220     board is not required to submit a report described in Subsection (4), recommend in a report to
221     the Business and Labor Interim Committee whether the Legislature should[: (i)] amend or
222     repeal one or more provisions of the State Fire Code[; or].
223          [(ii) in a year of a regularly scheduled update of a nationally recognized fire code,
224     adopt with any modifications the nationally recognized fire code.]
225          (ii) As part of a recommendation described in Subsection (5)(a)(i), the board shall
226     describe the costs and benefits of each proposed amendment or repeal.
227          (b) The board may recommend legislative action related to the State Fire Code:
228          (i) on its own initiative; or
229          (ii) upon the receipt of a request by a city, county, or fire protection district that the
230     board recommend legislative action related to the State Fire Code.
231          (c) Within 45 days after [receipt of] the day on which the board receives a request
232     under Subsection [(3)] (5)(b), the board shall direct the division to convene an informal hearing
233     concerning the request.
234          (d) The board shall conduct a hearing under this section in accordance with the rules of
235     the board.
236          (e) The board shall decide whether to include the request in the report [required under]
237     described in Subsection [(3)] (5)(a) [whether to recommend the legislative action raised by a
238     request].
239          (f) (i) Within 15 days [following the completion of a hearing of the board under this
240     Subsection (3), the board] after the day on which the board conducts a hearing, the board shall
241     direct the division to notify the entity that made the request of the board's decision regarding
242     the request.
243          (ii) The division shall provide the notice:
244          [(i)] (A) in writing; and
245          [(ii)] (B) in a form prescribed by the board.
246          [(4)] (g) If the Business and Labor Interim Committee decides to recommend
247     legislative action to the Legislature, the Business and Labor Interim Committee shall prepare
248     legislation for consideration by the Legislature in the next general session that, if passed by the
249     Legislature, would[: (a) adopt a new State Fire Code in its entirety; or (b)] amend or repeal one
250     or more provisions of the State Fire Code.
251          [(5)] (6) (a) Notwithstanding [Subsection (3)] the provisions of this section, the board
252     may, in accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, amend a
253     State Fire Code if the board determines that waiting for legislative action in the next general
254     legislative session would:
255          (i) cause an imminent peril to the public health, safety, or welfare; or
256          (ii) place a person in violation of federal or other state law.
257          (b) If the board amends a State Fire Code in accordance with this Subsection [(5)] (6),
258     the board shall:
259          (i) publish the State Fire Code with the amendment; and
260          (ii) notify the Business and Labor Interim Committee of the adoption, including a copy
261     of an analysis by the board identifying specific reasons and justifications for its findings.
262          (c) If not formally adopted by the Legislature at [its] the next annual general session, an
263     amendment to a State Fire Code adopted under this Subsection [(5)] (6) is repealed on the July
264     1 immediately following the next annual general session that follows the adoption of the
265     amendment.
266          [(6)] (7) (a) [A] Except as provided in Subsection (7)(b), a legislative body of a
267     political subdivision may not enact an ordinance in the political subdivision's fire code that is
268     more restrictive [in its fire code requirements] than the State Fire Code:
269          (i) in order to meet a public safety need of the political subdivision; and
270          (ii) subject to the requirements of [this] Subsection [(6)] (7)(c).
271          (b) A legislative body of a political subdivision may not enact an ordinance in the
272     political subdivision's fire code that:
273          (i) is more restrictive than the State Fire Code; and
274          (ii) applies to detached one- and two-family dwellings and townhouses not more than
275     three stories above grade plane in height with a separate means of egress and their accessory
276     structures.
277          [(b)] (c) A legislative body of a political subdivision that enacts an ordinance under
278     [this section on or after July 1, 2010] Subsection (7)(a) shall:
279          (i) notify the board in writing at least 30 days before the day on which the legislative
280     body enacts the ordinance and include in the notice a statement as to the proposed subject
281     matter of the ordinance; and
282          (ii) after the legislative body enacts the ordinance, report to the board before the board
283     makes the report required under Subsection [(6)(c)] (7)(d), including providing the board:
284          (A) a copy of the ordinance enacted under this Subsection [(6)] (7); and
285          (B) a description of the public safety need that is the basis of enacting the ordinance.
286          [(c)] (d) The board shall submit to the Business and Labor Interim Committee each
287     year with the recommendations submitted in accordance with Subsection [(3)] (4):
288          (i) a list of the ordinances enacted under this Subsection [(6)] (7) during the fiscal year
289     immediately proceeding the report; and
290          (ii) recommendations, if any, for legislative action related to an ordinance enacted
291     under this Subsection [(6)] (7).
292          [(d)] (e) (i) The state fire marshal shall keep an indexed copy of an ordinance enacted
293     under this Subsection [(6)] (7).
294          (ii) The state fire marshal shall make a copy of an ordinance enacted under this
295     Subsection [(6)] (7) available on request.
296          [(e)] (f) The board may make rules in accordance with Title 63G, Chapter 3, Utah
297     Administrative Rulemaking Act, to establish procedures for a legislative body of a political
298     subdivision to follow to provide the notice and report required under this Subsection [(6)] (7).
299          (8) A state agency may not adopt a rule that:
300          (a) has the effect of changing a requirement of the State Fire Code; and
301          (b) applies to detached one- and two-family dwellings and townhouses not more than
302     three stories above grade plane in height with a separate means of egress and their accessory
303     structures.
304          Section 3. Section 15A-2-103 is amended to read:
305          15A-2-103. Specific editions adopted of construction code of a nationally
306     recognized code authority.
307          (1) Subject to the other provisions of this part, the following construction codes are
308     incorporated by reference, and together with the amendments specified in Chapter 3, Statewide
309     Amendments [to International Plumbing Code] Incorporated as Part of State Construction
310     Code, and Chapter 4, Local Amendments Incorporated as Part of State Construction Code, are
311     the construction standards to be applied to building construction, alteration, remodeling, and
312     repair, and in the regulation of building construction, alteration, remodeling, and repair in the
313     state:
314          (a) the 2012 edition of the International Building Code, including Appendix J, issued
315     by the International Code Council;
316          (b) the 2012 edition of the International Residential Code, issued by the International
317     Code Council;
318          (c) the 2012 edition of the International Plumbing Code, issued by the International
319     Code Council;
320          (d) the 2012 edition of the International Mechanical Code, issued by the International
321     Code Council;
322          (e) the 2012 edition of the International Fuel Gas Code, issued by the International
323     Code Council;
324          (f) the [2011] 2014 edition of the National Electrical Code, issued by the National Fire
325     Protection Association;
326          (g) the 2012 edition of the International Energy Conservation Code, issued by the
327     International Code Council;
328          (h) subject to Subsection 15A-2-104(2), the HUD Code;
329          (i) subject to Subsection 15A-2-104(1), Appendix E of the 2012 edition of the
330     International Residential Code, issued by the International Code Council; and
331          (j) subject to Subsection 15A-2-104(1), the 2005 edition of the NFPA 225 Model
332     Manufactured Home Installation Standard, issued by the National Fire Protection Association.
333          (2) Consistent with Title 65A, Chapter 8, Management of Forest Lands and Fire
334     Control, the Legislature adopts the 2006 edition of the Utah Wildland Urban Interface Code,
335     issued by the International Code Council, with the alternatives or amendments approved by the
336     Utah Division of Forestry, as a construction code that may be adopted by a local compliance
337     agency by local ordinance or other similar action as a local amendment to the codes listed in
338     this section.
339          Section 4. Section 15A-3-113 is amended to read:
340          15A-3-113. Amendments to Chapters 32 through 35 of IBC.
341          (1) A new section IBC, Section 3401.7, is added as follows: "3401.7 Parapet bracing,
342     wall anchors, and other appendages. Until June 30, 2014, a building constructed before 1975
343     shall have parapet bracing, wall anchors, and appendages such as cornices, spires, towers,
344     tanks, signs, statuary, etc. evaluated by a licensed engineer when the building is undergoing
345     structural alterations, which may include structural sheathing replacement of 10% or greater, or
346     other structural repairs. Reroofing or water membrane replacement may not be considered a
347     structural alteration or repair for purposes of this section. Beginning July 1, 2014, a building
348     constructed before 1975 shall have parapet bracing, wall anchors, and appendages such as
349     cornices, spires, towers, tanks, signs, statuary, etc. evaluated by a licensed engineer when the
350     building is undergoing a total reroofing. Parapet bracing, wall anchors, and appendages
351     required by this section shall be evaluated in accordance with 75% of the seismic forces as
352     specified in Section 1613. When allowed by the local building official, alternate methods of
353     equivalent strength as referenced in an approved code under Utah Code, Subsection
354     15A-1-204[(6)](7)(a), will be considered when accompanied by engineer-sealed drawings,
355     details, and calculations. When found to be deficient because of design or deteriorated
356     condition, the engineer's recommendations to anchor, brace, reinforce, or remove the deficient
357     feature shall be implemented.
358     Exceptions:
359     1. Group R-3 and U occupancies.
360     2. Unreinforced masonry parapets need not be braced according to the above stated provisions
361     provided that the maximum height of an unreinforced masonry parapet above the level of the
362     diaphragm tension anchors or above the parapet braces shall not exceed one and one-half times
363     the thickness of the parapet wall. The parapet height may be a maximum of two and one-half
364     times its thickness in other than Seismic Design Categories D, E, or F."
365          (2) IBC, Section 3408.4, is deleted and replaced with the following: "3408.4 Seismic.
366     When a change in occupancy results in a structure being reclassified to a higher Risk Category
367     (as defined in Table 1604.5), or when such change of occupancy results in a design occupant
368     load increase of 100% or more, the structure shall conform to the seismic requirements for a
369     new structure.
370     Exceptions:
371     1. Specific seismic detailing requirements of this code or ASCE 7 for a new structure shall not
372     be required to be met where it can be shown that the level of performance and seismic safety is
373     equivalent to that of a new structure. A demonstration of equivalence analysis shall consider
374     the regularity, overstrength, redundancy, and ductility of the structure. Alternatively, the
375     building official may allow the structure to be upgraded in accordance with referenced sections
376     as found in an approved code under Utah Code, Subsection 15A-1-204[(6)](7)(a).
377     2. When a change of use results in a structure being reclassified from Risk Category I or II to
378     Risk Category III and the structure is located in a seismic map area where SDS is less than
379     0.33, compliance with the seismic requirements of this code and ASCE 7 are not required.
380     3. Where design occupant load increase is less than 25 occupants and the Risk Category does
381     not change."
382          (3) In IBC, Chapter 35, the referenced standard ICCA117.1-09, Section 606.2,
383     Exception 1 is modified to include the following sentence at the end of the exception:
384          "The minimum clear floor space shall be centered on the sink assembly."
385          (4) The following referenced standard is added under UL in IBC, Chapter 35:
386      "NumberTitleReferenced in code section number
387      2034-2008Standard of Single- and
Multiple-station Carbon Monoxide
Alarms		907.9"

388          Section 5. Section 15A-3-303 is amended to read:
389          15A-3-303. Amendments to Chapter 3 of IPC.
390          (1) In IPC, Section 303.4, the following exception is added:
391     "Exception: Third-party certification for backflow prevention assemblies will consist of any
392     combination of two certifications, laboratory or field. Acceptable third party laboratory
393     certifying agencies are ASSE, IAPMO, and USC-FCCCHR. USC-FCCCHR currently
394     provides the only field testing of backflow protection assemblies. Also see
395     www.drinkingwater.utah.gov and Division of Drinking Water Rule, Utah Administrative Code,
396     R309-305-6."
397          (2) IPC, Section 304.3, Meter Boxes, is deleted.
398          (3) IPC, Section 311.1, is deleted.
399          (4) In IPC, Section 312.3, the following is added at the end of the paragraph:
400          "Where water is not available at the construction site or where freezing conditions limit
401     the use of water on the construction site, plastic drainage and vent pipe may be permitted to be
402     tested with air. The following procedures shall be followed:
403     1. Contractor shall recognize that plastic is extremely brittle at lower temperatures and can
404     explode, causing serious injury or death.
405     2. Contractor assumes all liability for injury or death to persons or damage to property or for
406     claims for labor and/or material arising from any alleged failure of the system during testing
407     with air or compressed gasses.
408     3. Proper personal protective equipment, including safety eyewear and protective headgear,
409     should be worn by all individuals in any area where an air or gas test is being conducted.
410     4. Contractor shall take all precautions necessary to limit the pressure within the plastic piping.
411     5. No [water supply] drain and vent system shall be pressurized in excess of 6 psi as measured
412     by accurate gauges graduated to no more than three times the test pressure.
413     6. The pressure gauge shall be monitored during the test period, which should not exceed 15
414     minutes.
415     7. At the conclusion of the test, the system shall be depressurized gradually, all trapped air or
416     gases should be vented, and test balls and plugs should be removed with caution."
417          (5) In IPC, Section 312.5, the following is added at the end of the paragraph:
418          "Where water is not available at the construction site or where freezing conditions limit
419     the use of water on the construction site, plastic water pipes may be permitted to be tested with
420     air. The following procedures shall be followed:
421     1. Contractor shall recognize that plastic is extremely brittle at lower temperatures and can
422     explode, causing serious injury or death.
423     2. Contractor assumes all liability for injury or death to persons or damage to property or for
424     claims for labor and/or material arising from any alleged failure of the system during testing
425     with air or compressed gasses.
426     3. Proper personal protective equipment, including safety eyewear and protective headgear,
427     should be worn by all individuals in any area where an air or gas test is being conducted.
428     4. Contractor shall take all precautions necessary to limit the pressure within the plastic piping.
429     5. Water supply systems shall be pressure tested to a minimum of 50 psi but not more than 80
430     psi as measured by accurate gauges graduated to no more than three times the test pressure.
431     6. The pressure gauge shall be monitored during the test period, which should not exceed 15
432     minutes.
433     7. At the conclusion of the test, the system shall be depressurized gradually, all trapped air or
434     gases should be vented, and test balls and plugs should be removed with caution."
435          (6) A new IPC, Section 312.10.3, is added as follows: "312.10.3 Tester Qualifications.
436     Testing shall be performed by a Utah Certified Backflow Preventer Assembly Tester in
437     accordance with Utah Administrative Code, R309-305."
438          Section 6. Section 15A-3-601 is amended to read:
439          15A-3-601. General provisions.
440          The following are adopted as amendments to the NEC to be applicable statewide:
441          (1) The IRC provisions are adopted as the residential electrical standards applicable to
442     installations applicable under the IRC. All other installations shall comply with the adopted
443     NEC.
444          [(2) In NEC, Section 310.15(B)(7), the second sentence is deleted and replaced with
445     the following: "For application of this section, the main power feeder shall be the feeder(s)
446     between the main disconnect and the panelboard(s)."]
447          (2) In NEC, Section 240.87(B), the following is added as an additional approved
448     equivalent means:
449          "6. An instantaneous trip function set at or below the available fault current."
450          Section 7. Section 15A-4-107 is amended to read:
451          15A-4-107. Amendments to IBC applicable to Sandy City.
452          The following amendments are adopted as amendments to the IBC for Sandy City:
453          (1) A new IBC, Section (F)903.2.13, is added as follows: "(F)903.2.13 An automatic
454     sprinkler system shall be installed in accordance with NFPA 13 throughout buildings
455     containing all occupancies where fire flow exceeds 2,000 gallons per minute, based on Table
456     B105.1 of the [2009] 2012 International Fire Code. Exempt locations as indicated in Section
457     903.3.1.1.1 are allowed.
458     Exception: Automatic fire sprinklers are not required in buildings used solely for worship,
459     Group R Division 3, Group U occupancies and buildings complying with the International
460     Residential Code unless otherwise required by the International Fire Code.
461          (2) A new IBC, Appendix L, is added and adopted as follows: "Appendix L
462     BUILDINGS AND STRUCTURES CONSTRUCTED IN AREAS DESIGNATED AS
463     WILDLAND-URBAN INTERFACE AREAS
464     AL 101.1 General. Buildings and structures constructed in areas designated as Wildland-Urban
465     Interface Areas by Sandy City shall be constructed using ignition resistant construction as
466     determined by the Fire Marshal. Section 502 of the 2006 International Wildland-Urban
467     Interface Code (IWUIC), as promulgated by the International Code Council, shall be used to
468     determine Fire Hazard Severity. The provisions listed in Chapter 5 of the 2006 International
469     Wildland-Urban Interface Code, as modified herein, shall be used to determine the
470     requirements for Ignition Resistant Construction.
471     (i) In Section 504 of the IWUIC Class I IGNITION-RESISTANT CONSTRUCTION a new
472     Section 504.1.1 is added as follows: "504.1.1 General. Subsections 504.5, 504.6, and 504.7
473     shall only be required on the exposure side of the structure, as determined by the Fire Marshal,
474     where defensible space is less than 50 feet as defined in Section 603 of the 2006 International
475     Wildland-Urban Interface Code.
476     (ii) In Section 505 of the IWUIC Class 2 IGNITION-RESISTANT CONSTRUCTION
477     Subsections 505.5 and 505.7 are deleted."
478          Section 8. Repealer.
479          This bill repeals:
480          Section 15A-4-103, Amendments to IBC applicable to City of Farmington.
481          Section 15A-4-203, Amendments to IRC applicable to City of Farmington.
482          Section 9. Effective date.
483          This bill takes effect on July 1, 2015.